Tibiale intramedullêre spykeris 'nortopediese inplantaatspesifiek ontwerp om frakture van die tibia (die groter been in die onderbeen) te stabiliseer en te ondersteun. Hierdie chirurgiese tegniek is gewild omdat dit minimaal indringend is, effektiewe fraktuurgenesing bevorder en vroeë mobilisering van die pasiënt moontlik maak.
DieMASTIN intramedullêre spykeris 'n lang, dun staaf wat in die medullêre kanaal van die tibia geplaas word. Die kanaal loop deur die middel van die tibia en bied 'n sterk, stabiele omgewing vir die nael om vasgemaak te word. Die operasie word gewoonlik gedoen deur 'n klein insnyding naby die knie of enkel, en die intramedullêre nael word daarin geplaas. Sodra dieintramedullêre spykeringevoeg word, word skroewe aan elke punt gebruik om dit stewig aan die been vas te maak.
Dieintramedullêre spykerstelbestaan uit MASTIN tibiale spyker, eindkap, DCD-sluitbout, sluitbout ens. onderdele.
Hieronder is die spesifikasie vanortopediese intramedullêre spykerimplantaat
MASTIN Tibiale Nael
| Φ8.0 x 270 mm |
Φ8.0 x 280 mm | |
Φ8.0 x 300 mm | |
Φ8.0 x 310 mm | |
Φ8.0 x 330 mm | |
Φ8.0 x 340 mm | |
Φ9.0 x 270 mm | |
Φ9.0 x 280 mm | |
Φ9.0 x 300 mm | |
Φ9.0 x 310 mm | |
Φ9.0 x 330 mm | |
Φ9.0 x 340 mm | |
Φ10.0 x 270 mm | |
Φ10.0 x 280 mm | |
Φ10.0 x 300 mm | |
Φ10.0 x 310 mm | |
Φ10.0 x 330 mm | |
Φ10.0 x 340 mm | |
Φ10.0 x 360 mm | |
DCD-sluitbout
| Φ4.9 x 40 mm |
Φ4.9 x 45 mm | |
Φ4.9 x 50 mm | |
Φ4.9 x 55mm | |
Φ4.9 x 60 mm | |
Φ4.9 x 65 mm | |
Φ4.9 x 70 mm | |
Φ4.9 x 75 mm | |
Sluitbout vir Φ8 en 9
| Φ4.0 x 28 mm |
Φ4.0 x 30 mm | |
Φ4.0 x 32 mm | |
Φ4.0 x 34 mm | |
Φ4.0 x 36 mm | |
Φ4.0 x 38 mm | |
Φ4.0 x 40 mm | |
Φ4.0 x 42 mm | |
Φ4.0 x 44 mm | |
Φ4.0 x 46 mm | |
Φ4.0 x 48 mm | |
Φ4.0 x 50 mm | |
Φ4.0 x 52 mm | |
Φ4.0 x 54 mm | |
Φ4.0 x 56 mm | |
Φ4.0 x 58 mm | |
Sluitbout vir Φ10
| Φ5.0 x 26 mm |
Φ5.0 x 28 mm | |
Φ5.0 x 30 mm | |
Φ5.0 x 32 mm | |
Φ5.0 x 34 mm | |
Φ5.0 x 36 mm | |
Φ5.0 x 38 mm | |
Φ5.0 x 40 mm | |
Φ5.0 x 42 mm | |
Φ5.0 x 44 mm | |
Φ5.0 x 46 mm | |
Φ5.0 x 48 mm | |
Φ5.0 x 50 mm | |
Φ5.0 x 52 mm | |
Φ5.0 x 54 mm | |
Φ5.0 x 56 mm | |
Φ5.0 x 58 mm | |
Φ5.0 x 60 mm | |
Φ5.0 x 62 mm | |
Φ5.0 x 64 mm | |
Φ5.0 x 66 mm | |
Φ5.0 x 68 mm | |
MASTIN Eindkap
| +0 mm |
+5 mm | |
+10 mm |
Plasingstyd: 13 Mei 2025